Technical Overview
SVL FLUID FS500 is a fully synthetic solution with no mineral oil. When mixed with water, it forms a clear solution that lets operators see the exact point of contact between the tool and workpiece. Its surfactants and soluble polymers provide effective cooling.
Benefits and Performance Features
- Exceptional fluid life: Complete resistance to bacterial and biological attacks (complete removal of the tank’s rotten smell).
- Rapid cooling: Very fast removal of heat from the cutting area to prevent the deformation of sensitive parts.
- Rapid swarf settling: Rapid movement of suspended particles and grinding debris toward the filters, helping keep the nozzles clean.
- Workshop Working Conditions: Not creating smoke and oil vapors and maintaining the health of the respiratory system of the operators.
Technical Data Sheet (TDS)
Technical Data Sheet (TDS)
| Technical Parameter | Test method (Standard) | Typical Range / Value |
|---|---|---|
| Concentrate Appearance | Visual | Clear oil-free liquid (light yellow to clear amber) |
| Working Fluid Appearance (5% in Water) | Visual | Clear Solution |
| Density at 15°C | ASTM D-1298 | 1.030 – 1.080 g/cm³ |
| pH index (5% solution) | ASTM D-1287 | 9.0 – 9.6 |
| Fluid Stability | IP-263 / ASTM D-1479 | Complete and permanent stability (no mineral oil and no phase separation) |
| Cast-Iron Chip Corrosion Test (Herbert) | IP-125 | 0/0 – 0 (no rust) |
| Foaming (foam test) | IP-313 | Pass (no foaming at high nozzle pressure) |
Recommended Working Concentration
- Precision grinding and CNC grinding: 3% to 5% (ratio 1:33 to 1:20)
- Light Machining of Ferrous Metals: 4% to 6% (ratio 1:25 to 1:16)
Important Note: This product contains no mineral oil. To prevent contamination, thoroughly remove residues of previously used oils from the machine sump before use.
){kind=link}
Reviews
There are no reviews yet.