Technical Overview
SVL FLUID E300 HL is an advanced emulsifiable fluid with enhanced lubricity. Selected esters and polar lubricity additives strengthen the lubricating film, reduce friction at the cutting interface and help control tool temperature during demanding machining.
Benefits and Performance Features
- Excellent Surface Finish: Preventing the creation of roughness on the workpiece surface and improving dimensional tolerances.
- Extended Cutting-Tool Life: Reducing load and mechanical stress on cutting tools (carbide and diamond).
- Reduction of smoke and evaporation: Due to the use of oil bases with improved thermal stability.
- Optimum performance in sensitive alloys: Suitable for machining sensitive steel and alloy parts.
Technical Data Sheet (TDS)
Technical Data Sheet (TDS)
| Technical Parameter | Test method (Standard) | Typical Range / Value |
|---|---|---|
| Neat Oil Appearance | Visual | Clear amber/golden liquid |
| Emulsion Appearance (5% in Water) | Visual | Thick and stable milky emulsion |
| Density at 15°C | ASTM D-1298 | 0.890 – 0.925 g/cm³ |
| pH index (5% solution) | ASTM D-1287 | 8.8 – 9.5 |
| Emulsion Stability | IP-263 / ASTM D-1479 | Stable, with an Enhanced Lubricating Film |
| Cast-Iron Chip Corrosion Test (Herbert) | IP-125 | 0/0 – 0 (no rust) |
| Foaming (foam test) | IP-313 | Pass (rapid foam collapse) |
Recommended Working Concentration
- Precision Turning and Fine Surface Finish: 5% to 7% (ratio 1:20 to 1:15)
- Tapping, Reaming and Demanding Machining: 7% to 10% (ratio 1:14 to 1:10)
Important Note: To maintain maximum lubrication properties, measure fluid concentration regularly with a refractometer.
){kind=link}
Reviews
There are no reviews yet.