SVL FLUID E300 HL (Enhanced-Lubricity Emulsion)

تومان0

Specialty Emulsifiable Metalworking Fluid (E300 HL Series) featuring enhanced lubricity derived from vegetable-based lubricants and synthetic esters. An ideal choice for severe-duty machining operations, sensitive alloys, and applications where exceptional surface finish and minimized tool friction are paramount.

This post is also available in: فارسی (Persian)

Technical Product Overview The SVL FLUID E300 HL is an advanced emulsifiable fluid engineered for enhanced lubricity. In addition to premium base oils, this formulation incorporates esters and polar lubricity additives to achieve maximum lubrication performance. This significantly reduces friction at the cutting zone, effectively lowering the tool’s operating temperature.

Benefits and Performance Features

Superior Surface Finish: Prevents surface roughness on the workpiece and improves dimensional tolerances.
Extended Premium Tool Life: Reduces mechanical stress and load on cutting tools, including carbide and diamond inserts.
Reduced Smoke and Evaporation: Achieved through the use of base oils with enhanced thermal stability.
Optimal Performance on Sensitive Alloys: Highly suitable for machining critical steel and alloy components.

📊 Technical & Physicochemical Specifications (TDS)

Technical Parameter	Test Method (Standard)	Standard Range / Value
Appearance of Neat Oil	Visual	Clear deep amber to golden liquid
Appearance of 5% Emulsion	Visual	Dense, stable milky emulsion
Density at 15°C	ASTM D-1298	0.890 – 0.925 g/cm³
pH Value (5% Solution)	ASTM D-1287	8.8 – 9.5
Emulsion Stability	IP-263 / ASTM D-1479	Stable with enhanced lubricating film
Cast Iron Chip Corrosion Test (Herbert)	IP-125	0/0 – 0 (Rust-free)
Foaming (Foam Test)	IP-313	Pass (rapid foam collapse)

Recommended Dilution Guide

Precision Turning and High-Quality Surface Finishing: 5% to 7% (Dilution Ratio 1:20 to 1:15)
Tapping, Reaming, and Heavy-Duty Operations: 7% to 10% (Dilution Ratio 1:14 to 1:10)

Important Note: To maintain maximum lubricity, regularly measure the fluid concentration using a refractometer.

Reviews

There are no reviews yet.

Be the first to review “SVL FLUID E300 HL (Enhanced-Lubricity Emulsion)”

SVL FLUID E300 HL (Enhanced-Lubricity Emulsion)Emulsifiable Metalworking Fluids (Soluble Oils)

SVL FLUID E200 HW (Enhanced Hard-Water-Stable Emulsion)

SVL FLUID SS400 (Multi-Purpose Semi-Synthetic)