This post is also available in:
Technical Overview
The SVL FLUID FS500 is a fully synthetic fluid formulated completely free of mineral oils. Upon dilution with water, it creates a crystal-clear, glass-like solution that provides operators with unobstructed visibility of the exact tool-to-workpiece contact point. By leveraging advanced surface-active agents and water-soluble polymers, this product delivers exceptional cooling performance and superior heat dissipation.
Benefits and Performance Features
- طول عمر استثنایی سیال: مقاومت کامل در برابر حملات باکتریایی و بیولوژیکی (حذف کامل بوی گندیدگی مخزن).
- Ultra-Rapid Cooling: Rapidly dissipates heat from the cutting zone to prevent thermal distortion of sensitive components.
- Rapid Swarf Settlement: Efficiently directs suspended particles and fine debris toward filtration systems, ensuring continuous, clog-free coolant nozzle operation.
- Safe Workshop Environment: Eliminates smoke and oil mist emissions, safeguarding operators’ respiratory health and maintaining superior air quality on the shop floor.
📊 Technical & Physicochemical Specifications (TDS)
Technical and Physicochemical Specifications (Technical Data Sheet)
| Technical Parameter | Test Method (Standard) | Standard Range / Value |
|---|---|---|
| Appearance of Neat Concentrate | Visual | Clear, oil-free liquid (pale yellow to transparent |
| Appearance of 5% Aqueous Solution | Visual | Crystal-clear, glass-like solution |
| Density at 15°C | ASTM D-1298 | 1.030 – 1.080 g/cm³ |
| pH Value (5% Solution) | ASTM D-1287 | 9.0 – 9.6 |
| Solution Stability | IP-263 / ASTM D-1479 | Complete and permanent stability (mineral oil-free, zero phase separation) |
| Cast Iron Chip Corrosion Test (Herbert) | IP-125 | 0/0 – 0 (Rust-free) |
| Foaming (Foam Test) | Pass (Completely foam-free under high-pressure nozzle conditions) |
Recommended Dilution Guide
- High-Precision and CNC Grinding: 3% to 5% (Dilution Ratio 1:33 to 1:20)
- Light-Duty Machining of Ferrous Metals: 4% to 6% (Dilution Ratio 1:25 to 1:16)
Important Note: This product is entirely free of mineral oil. To prevent cross-contamination, the machine sump must be thoroughly purged of all residual oils prior to use.
Reviews
There are no reviews yet.